Wednesday, March 30, 2016
whence does the proton get its spin
For generations, Rudyard Kipling's Just So Stories have entertained young and old with their fanciful accounts of such natural wonders as how the leopard got its spots and how the elephant got its trunk.
For the past decade, physicists have been trying to write their own, real life tale of explanation. Their protagonist is the proton the heart of the hydrogen atom and one of the main constituents of matter. Their long standing pursuit is the origin of this particle's spin.
Standard reference books tell part of the story. The proton has a definite, measurable mass, electric charge, and spin, and its lifetime is at least as long as the universe is old. It is solid enough to be fired like a projectile in a particle accelerator.
On the other hand, the proton has a complicated internal structure. It's composed of different types of quarks held together by the so called strong force, which is mediated by particles known as gluons.
The spin of any elementary particle is represented by a quantum number that must be some multiple Toshiba Ultrasound Transducer of 1/2:0,1/2, 1/2, 1, 1, 3/2, 3/2, and so on. Because the proton has a well defined spin of 1/2, the spins of the individual bits and pieces inside it should add up to exactly that value.
In 1988, however, physicists were shocked to find experimental evidence suggesting that very little perhaps none of the proton's spin comes from the spin of the quarks thought to make up the proton (SN: 4/8/89, p. 215). They called this apparent paradox the proton spin crisis.
Since then, researchers have refined their experimental results and their theoretical calculations. The scope of the problem is now understood and the apparent smallness of the quark contribution confirmed, but the origin of the proton's spin remains largely a mystery.
"It's been a remarkable few years from both the experimental and the theoretical side," says Timothy E. Chupp of the University of Michigan in Ann Arbor. Physicists are now preparing a new generation of experiments to probe the inner workings of the proton in even greater detail.
"We want to make sure that we have the correct picture or model of what is inside the proton and how it adds up to the numbers we know well," says Emlyn W. Hughes of the California Institute of Technology in Pasadena. "The proton is complicated, but it is a very, very important object in our lives. It is unsatisfying intellectually that we cannot understand how the inside of the proton behaves."
To understand how a proton works, physicists must try to relate its measured properties as a composite particle to its complex internal structure (SN: 8/27/94, p. 140).
At the simplest level, a proton consists of three quarks: two up quarks, each with an electric charge of +2/3, and a down quark, with an electric charge of 1/3. The quarks are held together by gluons, which, in effect, shuttle between the quarks to keep them bound.
The gluons embody the strong force, which binds the quarks in groups of three (as in protons and neutrons) or in quark antiquark pairs (as in particles called mesons). The mathematical relationships of the theory known as quantum chromodynamics describe how quarks interact via gluons.
Each quark has a spin of 1/2, and each gluon a spin of 1. Initially, theorists made the naive assumption that two of a proton's quarks align like tops spinning in opposite directions, so their net spin is zero, while the third quark has an uncompensated spin of 1/2. This configuration leads to an overall spin of 1/2 for the proton, provided that the spins of the gluons somehow cancel out.
Theorists came to realize that such a model represents a gross oversimplification of the complex dynamics inside a proton, but they hoped it would suffice to account for important aspects of the proton's behavior. Indeed, quark gluon interactions are so complicated that physicists have been forced to create simple models that capture the essential features of the phenomena, thus avoiding the unwieldy mathematical baggage of the full theory
The first news that the simple quark spin model was inadequate came from the 1988 experiment at the European Laboratory for Particle Physics (CERN) in Geneva. Members of the European Muon Collaboration (EMC) fired a beam of high energy muons (heavy analogs of the electron) into a frigid ammonia target. An ammonia molecule consists of one nitrogen atom and three hydrogen atoms. The protons of the ammonia's hydrogen atoms were all aligned, or polarized, so that their spins were either parallel or antiparallel to the direction of the muon beam. The researchers then recorded the directions in which the muons were deflected by the protons.
At high energies, the muons interact with individual quarks within the proton rather than with the proton as a whole. The pattern of muon scattering therefore carries information about the arrangement of the quarks. Armed with the EMC results, theorists were able to calculate the total spin content of the proton carried by the quarks. To everyone's amazement, they came up with an answer that was close to zero. In other words, the spins of all the quarks, when added together, cancel nearly completely.
Those startling results set off a flurry of theorizing. "Hundreds of theoretical papers were written," Hughes says. "The field exploded, and the famous proton spin crisis' was born."
Was there a problem with the theory, the experiment, or both? One check on the experimental results was to perform a similar experiment using neutrons instead of protons. A neutron, which also has a spin of 1/2, consists of two down quarks and one up quark.
That experiment was done at the Stanford Linear Accelerator Center (SLAC). Researchers tracked electrons scattered by a target made up of helium 3 nuclei (each composed of two protons and a neutron). When the nuclei are polarized, the proton spins line up antiparallel to each other and cancel out. The results indicated that a neutron's quarks carry roughly 50 percent of its spin (SN: 9/18/93, p. 191).
Because the EMC and SLAC experiments were performed under quite different conditions, comparing the two sets of measurements directly proved difficult. A second round of experiments at SLAC and CERN was initiated to help resolve the discrepancy, even as theorists improved their methods of calculation.
At SLAC, researchers obtained high precision results for the quark spin contribution in the proton and deuteron (composed of a proton and neutron), confirming that the constituent quarks of both the proton and the neutron carry only a fraction of the particle's overall spin. In 1995, the researchers more than doubled the energy of the electron beam to measure again the spin effects in helium 3 nuclei and in protons and deuterons.
Despite numerous technical difficulties, the SLAC team obtained enough high quality data to pinpoint the quark contribution. "It is difficult to envision any future experiments outdoing the precision of these SLAC experiments in this energy range," Hughes comments.
At CERN, the Spin Muon Collaboration followed up the original EMC experiment, collecting data from firing muons at polarized protons until late last year. Both the SLAC and CERN data now essentially agree, indicating that only about 30 percent of the proton's and neutron's spin is found among the quarks.
The rest of the proton's spin must come from its gluons and the movements of gluons and quarks within the proton.
Complicating the picture, the number of quarks within the particle can actually fluctuate rapidly with the continuous creation and annihilation of quark antiquark pairs. In other words, the three constituent quarks speed about within a foaming sea of virtual particles produced by short lived quantum fluctuations, during which a gluon can momentarily split itself into a quark antiquark pair.
It's also possible that not only up and down quarks but also the other varieties of quarks strange, charm, bottom and top (SN: 7/1/95, p. 10) can take part in the fluctuations to create a mess of appearing and disappearing particles.
Recent experimental searches for evidence of strangeness in the proton imply that strange quarks carry an appreciable fraction of the particle's spin. On average, however, the spins of the strange quarks apparently point in the opposite direction to that of the proton itself.
That leaves a number of theoretical puzzles concerning the role played by strange quarks, says Robert L. Jaffe of the Massachusetts Institute of Technology.
At the moment, most physicists suspect that much of the proton's spin comes from its gluons. Somehow, these particles move or orient themselves in such a way that they produce a net spin.
Sunday, March 27, 2016
Easy Steps To Find Suitable Gate Counters
It is undeniable that every airport is rated on the basis of certain criteria. The criteria may include smooth passenger handling. Furthermore, even attractive and efficient counter facilities are likely to be a part of the criteria. Therefore, when finding gate counters, you have to keep in mind that choosing the wrong ones can affect the rating of the airport.GE Ultrasound Transducer Given below are 5 easy steps that can help you in finding suitable counters:
Step 1: You ought to choose among gate counters that have an esthetic design. The design would make or break the rating that the airport is likely to get. So, it is imperative for you to select among solution providers that specialize in creating an esthetic design.
Step 2: After you narrow down the solution providers on the basis of whether or not they can provide you with counters that have an aesthetic design, you are supposed to shift your focus to durability. In other words, you must choose among providers that use durable materials for making the counters.
Step 3: While the criteria that you consider during Step 1 and Step 2 should help you in finding suitable contractors, you can always take additional criteria into account. For instance, it is likely to be a smart move to look for counters that are in tandem with project requirements. While you are at it, you may be only concerned about functionality and investment.
Step 4: If you have found counters that meet all of the criteria discussed from Step 1 through Step 3, you can consider getting such counters. However, if you are still unsure, it's always better to look at how the solution providers make the counters. That's because their methodology may make you surer. For instance, solution providers that take the supporting and technical equipment into account while designing, manufacturing, and installing are likely to offer better counters than the providers that do not take the equipment into consideration.
Step 5: Last but not least, if you are still not sure whether you have found the suitable counters or not, you can always make the decision on the basis of user friendliness. In fact, ease of maintenance can also help you decide.
Interestingly,Fukuda Ultrasound Probe the same steps can also be followed when you are looking for gate counters. In fact, most of the other solutions that are meant for passenger terminal environment can be selected if you follow these steps, one after the other.
Step 1: You ought to choose among gate counters that have an esthetic design. The design would make or break the rating that the airport is likely to get. So, it is imperative for you to select among solution providers that specialize in creating an esthetic design.
Step 2: After you narrow down the solution providers on the basis of whether or not they can provide you with counters that have an aesthetic design, you are supposed to shift your focus to durability. In other words, you must choose among providers that use durable materials for making the counters.
Step 3: While the criteria that you consider during Step 1 and Step 2 should help you in finding suitable contractors, you can always take additional criteria into account. For instance, it is likely to be a smart move to look for counters that are in tandem with project requirements. While you are at it, you may be only concerned about functionality and investment.
Step 4: If you have found counters that meet all of the criteria discussed from Step 1 through Step 3, you can consider getting such counters. However, if you are still unsure, it's always better to look at how the solution providers make the counters. That's because their methodology may make you surer. For instance, solution providers that take the supporting and technical equipment into account while designing, manufacturing, and installing are likely to offer better counters than the providers that do not take the equipment into consideration.
Step 5: Last but not least, if you are still not sure whether you have found the suitable counters or not, you can always make the decision on the basis of user friendliness. In fact, ease of maintenance can also help you decide.
Interestingly,Fukuda Ultrasound Probe the same steps can also be followed when you are looking for gate counters. In fact, most of the other solutions that are meant for passenger terminal environment can be selected if you follow these steps, one after the other.
Subscribe to:
Posts (Atom)